UNICAT® logo
UL 15-DK-HD

Chassis
  • Mercedes-Benz Unimog 6x6
  • Unimog heavy duty chassis
  • Wheel base 3900 + 1400 mm (12' 10" + 4' 7")
  • U-section frame
  • Torsional flexible load carrying frame
  • Cross country ratio transmission
  • Additional gearbox with crawler gears for hill climbing capacity over 100% grade
  • All gears usable both forward and reverse
  • All wheel drive can be selected while driving
  • Differential locks for front and both rear axles, can be selected while driving
  • Center differntial lock for rear axles
  • Fully protected drive train using torque tube technology
  • High mounted gear transmission
  • High ramp breakover angle
  • Portal axels for high axle ground clearance
  • Front and rear tires follow same track
  • Enhanced driving safety using coil springs, shock absorbers and stabilizers both front and rear
  • Six wheel disk brakes
  • Enhanced water fording capacity with raised engine air intake and vent openings
  • Torsion free drivers cab mounting using 3 point kinematic mount
  • Soundproofed and viabration isolated drivers cab
  • Crew-cab with raised ceiling
  • Hydraulic power steering
  • Air brakes and power assisted clutch
  • Engine compartment easily serviced from exterior hood
  • Manual hydraulic drivers cab tilt
  • Low emmision turbo diesel engine.
  • Engine oil lubrication system designed for extreme tilt and slope
  • Engine enclosure for lower noise emission
  • Tire pressure regulating system, to regulate pressure while driving
  • Roof rack with stainless steel branch guard
  • Crane for loading of spare wheel
Body
    Frame assembly
  • Mercedes-Benz approved, low 3 point kinematic attachment with main and flex mounts
    for stress free body coupling to the torsion elastic chassis frame

    Body unit construction
  • Self supporting UNICAT sandwich plate panels of fibre glass composite (corrosion free)
  • Panel connections made by adhesive bond to custom extrusions
    eliminates metallic heat conduction paths
  • Matched thermal coeficients of expansion prevent distortion with changes in temperature
  • Wall thickness 60 mm (2.36") with polyurethane foam insulation, 3 mm (0.12") FRP outer surface, 2 mm (0.08") FRP inner surface, insulation rating 0.44 W/m2 K (0.078 Btu/ft2 hr °F)
  • Bottom panel at 95 mm (3.7") thickness, compound construction of plywood bottom,
    foam body, integrated welded steel frame and surfaces of FRP

    Access to drivers cab
  • Highly flexible waterproof bellows coupling

    Doors and hatches
  • UNICAT door and storage hatches constructed of fibreglass composite plates and frames
  • Thickness of door 60 mm (2.36")
  • Double sealed doors and panels
  • Heavy duty locks with seal compression
  • Stainless steel hinges throughout
  • Additional retractable bolts at top and bottom of doors
  • Safety cylinder locks all keyed alike

    Windows and skylights
  • Burglarproof, scratchproof sidelights and skylights
  • Double insulated thermal window glass
  • Skylights can be turned 180° and stepped on

    Extension roof
  • UNICAT expansion sleeping roof with electric drive mechanism
  • Well insulated, expedition proven and maintenance free
Interior layout
    Seating unit
  • U-shaped seating unit with adjustable swivelling table on pedastel in the rear of the cabine

    Beds
  • 4 single beds in the extension roof
  • 2 beds, size: 900 x 2000 mm (2' 11" x 6' 7")
  • 2 beds, size: 800 x 2000 mm (2' 7" x 6' 7")
  • Seating unit converts to additional double bed

    Combined shower and toilet room
  • Shower with door, to seperate from livingroom
  • Porcelain-vacuum toilet
  • Also usable as drystorage due to its own radiator

    Kitchen
  • Diesel powered ceramic stove
  • Conventional/microwave oven
  • Household size stainless steel sink with single handle faucet
  • 2 x 120 l (26 gallon) fridge with ***-freezer
  • Kitchen closet with drawers

    Storage
  • Big linen cupboard with drawers
  • Storage space in the seating unit
  • Large aluminium exterior storage boxes

    Workmanship
  • All furniture is built to the highest cabinetmaking standard,
    made of wood core plywood using heavy duty locks and hinges
  • Materials and finishes may be specified by customer

    Layout
  • Design and color of floor, walls, ceiling and upholstery may be chosen by the customer
  • Walls and ceiling are painted with multiple coats
Technical equipment
    Electrical equipment
  • Custom control panel to control powermanagement and liquide storages
  • Battery main switch, savety cutout, fault current breaker
  • DC power supply by battery bank, automatic I-U regulated alternator
    and AC automatic I-U shore charger with cell temperature sensing
  • Inverter for 120/240 V
  • Power plugs for 12 V, 120/240 V and 400 V
  • Pre-wired for solar system
  • Pre-wired for TV, video and music system

    Generator
  • Watercooled diesel generator, remote controlled
  • Cooling-water circulation connected to the engine cooling system
  • AC and rotary current, power 4 kVA

    Lighting
  • Integrated low voltage quartz halogen lights
    above the table, kitchen, hall way, shower, storage area and sleeping roof

    Water supply
  • 900 l (198 gallon) freeze-proof drinking water tanks
  • 40 l (8.8 gallon) hot water heat-exchanger
  • Freeze proof waste water tank
  • Water faucets in both bath and kitchen have removable sprayers
  • All components are built due to highest household quality standards
  • All plumbing is insulated to prevent freezing

    Toilet
  • Porcelain-vacuum toilet with water flushing
  • Freeze proof sewage holding tank

    Heating system
  • 4 stage diesel/electric powered warm water central heating (2 x 5 kW),
    with engine preheating system and diesel preheating system
  • Waste and sewage holding tank heating
  • High radiant heat share due to radiators in living area and towel radiator in bath area
  • Antifrost system
General information
    GVWR
  • 14,900 kg (32,850 lbs)

© 2016 UNICAT GmbH—information is subject to availability, changes in price, technical modification and error.